If no one in your household suffers from allergies or unexplained symptoms or illnesses and if, after a visual inspection of the inside of the ducts, you see no indication that your air ducts are contaminated with large deposits of dust or mold (no musty odor or visible mold growth), having your air ducts cleaned is probably unnecessary. It is normal for the return registers to get dusty as dust-laden air is pulled through the grate. This does not indicate that your air ducts are contaminated with heavy deposits of dust or debris; the registers can be easily vacuumed or removed and cleaned.
All of the products discussed above are registered solely for the purpose of sanitizing the smooth surfaces of unlined (bare) sheet metal ducts. No products are currently registered as biocides for use on fiber glass duct board or fiber glass lined ducts, so it is important to determine if sections of your system contain these materials before permitting the application of any biocide.
i called in and spoke to paula who said 6 weeks to get an appointment. i asked what cleaners they use to sanatize and deoderize. she said she was the only one there and didnt know. i explained i have severe allergies and she said someone would call me and let me know. they never called. brian came today and vaccumed my vents- and not all of them. i called and spoke to someone who said they were the manager named jennifer- she kept laughing at me and refused to let me talk to anyone else-she said she is the owner and would not give a refund.
Another sketchy claim made by most duct-cleaning operations and their trade association is that dirty ducts and equipment overburden heating and cooling equipment, which wastes energy. Again, it intuitively makes sense that a cleaner system will run smoother and last longer — after all, that’s why we and HVAC-equipment manufacturers and repair services recommend that you regularly change your filters. But the page “Benefits of HVAC Cleaning” on the National Air Duct Cleaners Association (NADCA) website stretches this benefit too far by stating: “According to the U.S. Department of Energy, 25 to 40 percent of the energy used for heating and cooling a home is wasted.”
The original furnace was a coal fired “octopus” design which had no blower to circulate the air but relied upon warm air rising to distribute the heat. That also means that the system breathed air in from the basement and most of this type did not have a cold air return system. At some point (probably in the 1940’s) the system was upgraded to a forced air gas furnace. The upgrade included replacing the 12″ diameter air ducts exposed in the basement with 6″ ducts and a cold air return system of ducts from the two (only two) air returns on the first floor.
You should be aware that although a substance may look like mold, a positive determination of whether it is mold or not can be made only by an expert and may require laboratory analysis for final confirmation. For about $50, some microbiology laboratories can tell you whether a sample sent to them on a clear strip of sticky household tape is mold or simply a substance that resembles it.