I just had my Air ducts “cleaned”. The person who came to my house works for an air duct cleaning company who uses a professional vacuum. He said the company would charge me about $900 but he can do it aside on his own and charge me half of that. However, when he came over the house, he brought the rotary brush along with his domestic vacuum cleaner that it’s hose was about 5 feet long, I ask him that the wasnt strong enough to pull dust out, and he said, it’s similar to what companies use. I was in doubt and he didnt cover the vents so im thinking all dust must have come out from every air vents. Could this vacuum have taking the debris out of the air ducts? Or how can I myself find out if the inside of the air ducts have been cleaned and no debris is sitting there? I have dust all over my house.
I am 79 years old, bought a condo & spent a lot of money on it. this winter my first bill was 450.00. had my furnace checked out, which is on the roof. it was old rusted out & leeking oil. i talked to owner & had new unit installed. they came out to clean ducks & they were split & worn out. there is no crawl space because theres a unit above me. my real estate lady or this company will not help me fix this problem.
I called a company name “GREEN RHVAC” with their $29.00 one system air duck cleaning. When the guy came with a truck I asked him to tell me how much he will charge and he said that if he gave me price and I didn’t want the service then he would charge me $89 or he would tell me how much he charge me after he finished the work. I immoderately sense that I made mistake to call him to my house. To cut my lost I asked him to give me the price and it was $1600 for two systems house. I paid $100 to him for my lesson to learn and search online to find this site is very helpfully and I should do it before to call anyone for air duck cleaning.
Wow Really! Seems many of you just going for a low price or Groupon: THIS IS YOUR PROBLEM! You get what you pay for. Having the whole system cleaned including the furnace and it’s components, such as the coils will increase system efficiency. A camera/scope should be use before and after to show you the results.The needs to be done by certified professionals. It sure can’t hurt the indoor air quality.
I purchased a Groupon for cleaning of unlimited air ducts and one return vent for $39. I should have checked into their hours first because they only offer services during normal business hours. So, with no evenings or weekends available you have to take time off work. I asked Groupon for a refund when I realized this and they refused because it wasn’t within the three day window. Then they didn’t even show up or call for the appointment. I called them after they were an hour late and they were going to call the local dispatch office and have them call me back within 15 minutes. I did not receive that call. I called again and was told I would get a call back from a manager. That didn’t happen either. So I asked Groupon for a refund again and they gave me Groupon bucks. When the survey came asking if I was satisfied with the Groupon customer service I said no, I want real money. I got my real refund the next day. Seems to me Groupon should stop dealing with these companies.
Simon and co. did a great job cleaning out the ducts in our house. He showed us how they looked before (with about a 1/4 inch of dust at the bottom) and how they looked after (almost like new with not a bit of dust left). He helped us find some drafty spots in the vents and was happy to help us fix those at no extra cost. Very professional and good work.
We bought the Groupon deal. One of the techs knocked a pitcher off a shelf in our kitchen during the service and did not tell us about it, he just picked it (and the two broken pieces that came out of it) up and put them back on a different shelf. We didn't discover that it was broken until later that evening. We managed to speak with one of the two guys that evening, who said it wasn't him, must have been the other guy, (and still had the nerve to try to talk us into an additional $250 worth of service with them!) and said he would talk to his boss and have someone call us. That didn't happen. I have called the office several times myself in the two weeks since trying to speak with a manager, and my husband has also called. No one has bothered to call us back yet to address this or offer any sort of recompense for the broken item. Therefore I can't recommend this company to anyone else.
Maybe I took him to literally but I am pretty sure cops wont show up to ensure that my duct gets replaced. He said it would be over 1000 dollars to replace the ductwork if that is the case. Now, I spoke to a friend who did 2 ductwork lines on his own in his attic and he said it was like 15 dollars for the plastic wirewound tubing to create new ducts. Should I cancel that appointment and just do the work on my own? I feel like I’m a chump or lazy for considering paying someone to do this work.
If I could rate this company a zero I would in a heartbeat. I purchased the service off of Groupon and to say that the groupon was misleading is an understatement. I was at work and my girlfriend was at the house when they got there (keep in mind it took six months for them to be able to get there because they were over booked). They tried to upcharge my girlfriend $250 immediately upon getting there. I told her to put me on the phone and spoke with the guy myself. He said that he would have the manager call me and that he would just start on the service. I received a text from my girlfriend 10 minutes later that the people had left. I never received a call from the manager. They didn't do all vents in the house. All they did was the main floor. It was a pathetic attempt to say the least. I received a call from the customer service representative that told me that the package I received was for a "Air Duct Cleaning with deodorizing treatment" and it was not a "Air Duct DEEP Cleaning with deodorizing treatment" and that is where the additional $250 was coming from. They then told me that if I wanted, they could come back out a week later and explain it to me professionally and also blamed Groupon for the posting to be misleading. The rep bragged about their ratings on review sites. I am guessing that this is taken down soon and deleted by the company. But if I can just save one person's time, money and efforts to better their home with this post I am more than happy to do it. STAY AWAY FROM THIS COMPANY, THEY ARE UNPROFESSIONAL AND WILL SCREW YOU OVER FOR THEM TO SAVE A PENNY.
All of you have dentists, you have doctors, you have preachers, you have mechanics. You don’t have to know everything about everything but you have to have people in your life that you can trust. Don’t just open up the phone book and pick a mechanical (HVAC) contractor. Call your friends and family and ask for referrals. There are no black and white (scam or not a scam) answers here.
Well, I had the cleaning done. The handler is definitely much quieter. It was explained to me that with the coils clean, the condensation will be able to sweat off instead of sticking to the dust and dirt, therefore the humidity (lots of humidity in florida) will be removed better. I feel as if it was worth it, but, I will definitely change that filter every 3 weeks or so from now on. I don’t want to pay that cost again.
A small number of products are currently registered by EPA specifically for use on the inside of bare sheet metal air ducts. A number of products are also registered for use as sanitizers on hard surfaces, which could include the interior of bare sheet metal ducts. While many such products may be used legally inside of unlined ducts if all label directions are followed, some of the directions on the label may be inappropriate for use in ducts. For example, if the directions indicate "rinse with water", the added moisture could stimulate mold growth.
The original furnace was a coal fired “octopus” design which had no blower to circulate the air but relied upon warm air rising to distribute the heat. That also means that the system breathed air in from the basement and most of this type did not have a cold air return system. At some point (probably in the 1940’s) the system was upgraded to a forced air gas furnace. The upgrade included replacing the 12″ diameter air ducts exposed in the basement with 6″ ducts and a cold air return system of ducts from the two (only two) air returns on the first floor.
#3 The ONLY time Duct cleaning is needed is when the home had a fire, Bad roof leak on to FIBERGLASS ductwork or house sat vacant for many years with out the air running. And its better to replace than to do “abrasive” duct cleaning. If the duct cleaning has a rotating brush it will remove part of the glue that is holding the Fiberglass in the ducts together, PERIOD no matter how much the say it don’t because the brush is soft.
The EPA and CMHC researchers used different methodologies. The CMHC study called on several duct-cleaning services. The companies were not made aware they were part of a study, and the researchers did not control for time spent or methods used. The EPA study prescribed and controlled methods used on a smaller number of homes. While the duct-cleaning industry argues both studies have flaws, no other research has challenged the findings. And although the equipment and methods used by duct-cleaning companies have changed since these studies were conducted, the air ducts in homes haven’t.
Most organizations concerned with duct cleaning, including EPA, NADCA, NAIMA and the Sheet Metal and Air Conditioning Contractors' National Association (SMACNA) do not currently recommend the routine use of sealants to encapsulate contaminants in any type of duct. Instances when the use of sealants to encapsulate the duct surfaces may be appropriate include the repair of damaged fiber glass insulation or when combating fire damage within ducts. Sealants should never be used on wet duct liner, to cover actively growing mold, or to cover debris in the ducts, and should only be applied after cleaning according to NADCA or other appropriate guidelines or standards.
Internal insulation provides better acoustical (noise) control. Flexible duct is very low cost. These products are engineered specifically for use in ducts or as ducts themselves, and are tested in accordance with standards established by Underwriters Laboratories (UL), the American Society for Testing and Materials (ASTM), and the National Fire Protection Association (NFPA). Many insulated duct systems have operated for years without supporting significant mold growth. Keeping them reasonably clean and dry is generally adequate. However, there is substantial debate about whether porous insulation materials (e.g., fiber glass) are more prone to microbial contamination than bare sheet metal ducts. If enough dirt and moisture are permitted to enter the duct system, there may be no significant difference in the rate or extent of microbial growth in internally lined or bare sheet metal ducts. However, treatment of mold contamination on bare sheet metal is much easier. Cleaning and treatment with an EPA-registered biocide are possible. Once fiberglass duct liner is contaminated with mold, cleaning is not sufficient to prevent re-growth and there are no EPA-registered biocides for the treatment of porous duct materials. EPA, NADCA and NAIMA all recommend the replacement of wet or moldy fiber glass duct material.
I just had my blower module replaced because my AC coil was frozen over. The underside of my coils had a thick mat of dust because I had never had it cleaned. I cleaned it myself by using a soft brush attachement on a shop vac. The inside of the blower appears to have a white/green growth, and I am sure the ductwork of my 30 year old house can’t be in good condition.
if you do not want to put that dryer cleaner down your ducts (I don’t because if it gets stuck somewhere you will be stuck calling a pro to get it out! anyway what I did was take the furnace filter out for max air flow, and then close off all your vents leaving only one open at a time to clean. This directs all the air from your system only to the vent going to the opening you are cleaning. Then stick the flexible tubing of your vacuum cleaner down a bit into the vent and turn on the vacuum. Then go to the thermostat and turn on the fan only and let the vacuum run for a few minutes. That does a great job and you can do it with or without the brush. When done put a fresh filter in. I only do this for the vents where the air blows out. I would not recommend cleaning the cold air returns this was as you would likely be forcing dirt and dust into your furnace. If you want to vacuum the cold air returns, turn the system off
Very interesting article. I searched articles about services for cleaning ventilation systems. But I have some questions. For cleaning ventilation system used special products for cleaning. Can I know in company manager about, which type of cleaning products they use? Your family members may be allergic in some components. It’s very big problem. And one more problem it’s how to choose the right company in Internet. Sometimes I don’t have much time to find a company in my town and I use the Internet. But I find a lot of company. It is very popular services, for example, Stanley Steemer – https://www.stanleysteemer.com/ or my local not very popular service, for example, AllstatesAirDuctPro – http://allstatesairductpro.us/. Can I understand the company is professional or not, only looking through the website? What must I check on the website? Who has helpful information? I will very grateful for your help. Links I add for understanding my problem. They are random and not for advertising.
Some research suggests that cleaning heating and cooling system components (e.g., cooling coils, fans and heat exchangers) may improve the efficiency of your system, resulting in a longer operating life, as well as some energy and maintenance cost savings. However, little evidence exists that cleaning only the ducts will improve the efficiency of the system.